Home > Mitel/InterTel phone systems > Mitel/Inter-Tel Info > Mitel 3000 programming by phone

Mitel 3000 programming by phone

Mitel 3000 programming by phone
You access all the System Programming options via the PROGRAM key on the digital telephone connected to the first jack (extension # 20).

1. From that phone, press the PROGRAM key.

2. Press the Scroll Down key  until “System Programming” is displayed.

3. Select “System Programming.” ( NOTE: Selecting “System Programming” from any phone other than extension # 20 will result in the prompt “Programming Refused” being displayed.

The following screen is displayed: "Enter System Password - Exit."

• Enter the System Programming Password, which is 1111 by default.

NOTE: You can also enter System Programming by dialing ##1111 at the programming extension and selecting “Send Digits”.

The screen appears offering options to configure the overall system, the extensions, or the lines.

Select Option - System - Extensions - Lines

• Under “System”, you will find the programming options that affect the system as a whole.

• Under “Extensions”, you will find the programming options that affect the extensions (individual phones).

• Under “Lines”, you will find the programming options that affect the incoming lines.