External Antennas for EnGenius phones
with either 30-ft or 60-ft. cable.
Works with SN900, SN920, DuraFon.

Use this when you can't mount the EnGenius base up high enough for adequate range. It has a clamp to attach to a piece of pipe or antenna mast, but can also be attached to a wall, post, tree or chimney with proper hardware. It's excellent for ranches, farms, warehouses, auto dealers, mines, camps, resorts, parks, oil fields, industrial parks, farms, educational campuses, military bases, etc.

Antennas are available with your choice of approx. 30-ft. or approx. 60-ft. coaxial cables, equipped with a special reverse thread TNC connector to mate with the base. These connectors are hard to find. Don't plan on cutting the cable and putting a new connector on it.

TWO CABLE CHOICES: PLAN CAREFULLY
Shorter cable means more power.

• The antenna produces a 6db gain in signal strength.

• The 60' cable has a 3db loss, resulting in net 3db gain with the antenna.

• The 30' cable has a 0db loss, maintaining the 6db gain with the antenna, for maximum output and range.

• Range depends on antenna height and environmental factors.

• If you don't need the entire length of cable, stretch it out -- don't leave it coiled.

Because of the heavy weight of the cable, the shipping charge is about $15 in the USA when ordered with a complete EnGenius phone, or $25 when ordered without a phone.

One antenna is required for each base unit.

We strongly recommend the use of the EnGenius lightning protector with the antenna.

IMPORTANT: AbleComm is an AUTHORIZED ENGENIUS DEALER.

►As an authorized dealer, we are not permitted to publish prices online. Please call 1 888 ABLE 999 or email for info and ordering.